Allback Linseed Oil Wax
Made from purified linseed oil and beeswax, Allback Linseed Oil Wax is an extremely versatile finish that can be used to condition and protect a wide variety of porous surfaces such as matte painted surfaces, wood, concrete, brick, slate, furniture, metal, leather, and more. It is food safe, making it great for finishing countertops. It leaves a silky, matte, water-repellent finish, which can be cleaned with a weak solution of Linseed Oil Soap and water.
Allback Linseed Oil Wax can be applied with a rag or a stiff brush depending on the project. Leave for approximately 15 minutes to allow the oil to soak in. Use a clean rag to wipe away excess. In most cases, a single application of Linseed Oil Wax is sufficient. See the Linseed Oil Wax section of the Allback Concise Handbook for more detail. For furniture, apply Linseed Oil Wax on its own to wood, or apply over Allback Linus Interior Paint .
The linseed oil, beeswax, and pigments are all boiled together so that the beeswax incorporates as the oil dries. Dry time is approximately 24 hours under ideal conditions, but can be longer depending on environmental conditions, the thickness of the wax layer, and in other special cases such as on knots in wood with a high resin content. Be sure to wipe off excess. Once applied, the wax will take about 1 week to become completely hardened, so it is important to use the surface gently within the first week after application.
Absorbent surfaces such as floors, counters, furniture, wood, masonry surfaces, and more.
40 sq metres (approx. 400 sqft) per litre, depending on surface finish and porosity.
We Also Recommend